Bulletin de service / Recommandations
| SB Reference | Description of the SB | BERINGER Product P/N | Aircraft Make & Model |
|---|---|---|---|
| SB-004(0) | Modification of Maintenance Manuals | - | Pilatus PC-6 |
| SB-005(0) | Installation of small wheels for ski installation | - | Pilatus PC-6 |
| SB-006(0) | Optional small wheel installation | - | Pilatus PC-6 |
| SB-007(1) | Update of maintenance intervals | - | De Havilland DHC-6 |
| SB-008(1) | Optional high energy disc installation | - | Pilatus PC-6 |
| SB-009(0) | Longer bolts and axle | - | Extra 300 |
| SB-010(0) | Hydraulic fittings update | - | Extra 300 |
| SB-011(0) | Wheels replacement with static load over 3400N | RA-002(A), RA-002(B),RF-005(A), RF-005(B) | - |
| SB-012(0) | Wheel P/N update | - | Extra 300 |
| SB-013(0) | Alternative brake pads | - | Pilatus PC-6 |
| SB-014(1) | Assembly inspection | - | ZLIN Savage |
| AD-002(0) | Staining brake lines | Brake line staining | - |
| SB-015(1) | Cotter pin replacement | Superseded by SB-028 | - |
| SB-016(0) | Defective brake valve | FP-003 | - |
| SB-017(1) | Cotter pin replacement | Superseded by SB-028 | - |
| SB-018(1) | Special treatment for corrosive environment | Special treatment for corrosive environment | - |
| SB-019(4) | Cotter pin replacement | Superseded by SB-028 | - |
| SB-020(1) | Fairing installation | - | Extra 300 |
| SB-021(1) | Maintenance intervals update | - | Pilatus PC-6 |
| SB-022(0) | Regulator seepage | RE-001, RE-002 and RE-002.1 | - |
| SB-023(0) | Sensair compliance with STC | TP-005 and TP-006 | - |
| SB-024(0) | Schock Wheel screw replacement | LL-A-001 and LL-A-001.X | - |
| SB-025(0) | Backplate replacement | EA-003N and EA-003E | |
| AV-003(2) | Administrative change on Wheels | Administrative change on Wheels | - |
| SB-026(0) | Master Cylinder P/N | MP-001 and MP-001N for STC-002 | Pilatus PC-6 |
| SB-027(0) | Caliper piston seals replacement | EA-002 / EA-002.2 / EA-003 / EA-003.2 / EA-007E / EA-007.1E / EA-009.1E | - |
| AD-004(0) | Sensair App Connection | Sensair App Connection | - |
| AD-005(0) | DSC-008 Material modification | DSC-008 Material Modification | - |
| SB-028(3) | Back-Stop replacement | EA-003.3N / EA-003.4N / EA-003.5N / EA-003.6N / EA-004.2NR / EA-004.2NL / EA-004.3NR / EA-004.3NL / EA-004.5NR / EA-004.5NL / EA-008.1N / EA-008.2N / EA-008.7N / EA-008.9NR / EA-008.9NL | - |
| AD-006(0) | Brake Assembly updated with sub-assemblies | Administrative change on Calipers | - |
| AV-007(2) | Brake Assembly with new Aerotec+ brake pads available | - | |
| SB-030(0) | Tire bulges 4.00-4 Kenda | PAG01 | - |
| AV-008(0) | Caliper EA-016 and EA-017 | EA-016 and EA-017 | - |
| SB-031(0) | Wheel protection in abrasive environment | All Wheels | - |
| AV-009(0) | PA-46 Gear Door Clearance | - | Piper PA-46 |
|
HIGHLY RECOMMENDED |
Incorrect length of screws | V-CHC-009 | - |
| SB-033(0) | Fairing Clearance – Aerotec+ implantation | - | Vans RV10 |
| SB-034(1) | DA 40 Rudder Clearance with Beringer Kit Installed | - | Diamond DA-40 |
| SB-036(0) | Installation of the O-ring parking brake | FP-001 | - |
| SB-037 (0) | Lack of anodization on RE-002.1 | RE-002.1 | - |
| SB-038(1) | Brake pads erosion | All brake pads | - |