List of Advisories and Service Bulletins SB-004(0) STC-002 Manuals update for O-ring seal J-JTR-010N replaced by JNT-007N SB-007(1) MM-STC-008 Update of maintenance intervals - De Havilland DHC-6 SB-008(1) STC-002 Optional DSC-011.2 for higher energy SB-009(0) STC-012 Optional DSC-011.2 for higher energy / Longer bolts and axle - Extra 300 SB-010(0) STC-012 Hydraulic fittings update - Extra 300 SB-011(0) Wheels replacement with static load over 3400 - Product P/N : RA-002(A), RA-002(B),RF-005(A), RF-005(B) SB-012(0) STC-012 Wheel P/N update - Extra 300 SB-013(0) STC-002 Alternative brake pads - Pilatus PC-6 SB-014(1) Protective & Curative measures for roll pins corrosion or loosening SB-015(1) Cotter pin replacement Superseded by SB-028 SB-016(0) Defective brake valve FP-003 SB-017(1) Cotter pin replacement Superseded by SB-028 SB-018(1) Special treatment for corrosive environment / Special treatment for corrosive environment SB-019(4) Cotter pin replacement / Superseded by SB-028 SB-020(1) STC-012 Fairing installation - Extra 300 SB-021(1) STC-002 Maintenance intervals update - Pilatus PC-6 SB-022(0) Regulator see page RE-001, RE-002 and RE-002.1 SB-023(0) SensAIR compliance with STC / TP-005 and TP-006 SB-024(0) Shock Wheel screw replacement / LL-A-001 and LL-A-001.X SB-025(0) - Backstop replacement RNF-004 SB-026(1) Master Cylinder P/N MP-001 and MP-001N for STC-002 / Pilatus PC-6 SB-027(0) Caliper piston seals replacement EA-002 / EA-002.2 / EA-003 / EA-003.2 / EA-007E / EA-007.1E / EA-009.1E AV-004(0) Sensair App Connection AV-005(0) DSC-008 Material modification AV-006(0) Brake Assembly update - Backplate SB-028(3) Back-Stop replacement : EA-003.3N / EA-003.4N / EA-003.5N / EA-003.6N / EA-004.2NR / EA-004.2NL / EA-004.3NR / EA-004.3NL / EA-004.5NR / EA-004.5NL / EA-008.1N / EA-008.2N / EA-008.7N / EA-008.9NR / EA-008.9NL AV-007(3) Brake Assembly update - Brake pads EA-003E / EA-003N / EA-003.3E / EA-003.3N / EA-003.4N / EA-003.5N / EA-003.6N / EA-003.7N / EA-003.17N / EA-004E / EA-004N SB-030(0) Tire bulges 4.00-4 Kenda PAG01 AV-008(0) Caliper EA-016 and EA-017 SB-031(0) Wheel protection in abrasive environment All Wheels AV-009(1) PA-46 Gear Door Clearance SB-032(0) HIGHLY RECOMMENDED / Incorrect length of screws / V-CHC-009 SB-033(0) Fairing Clearance – Aerotec+ implantation Vans RV10 SB-034(1) / DA 40 Rudder Clearance with Beringer Kit Installed SB-036(0) Installation of the O-ring parking brake FP-001 SB-037(0) Lack of anodization on RE-002.1 SB-038(1) Brake pads erosion All brake pads SB-040(1) RF-024 Main Wheel Preflight Check SB-041(0) O-ring replacement on RF-033 AV-010(0) Brake disc material change on DSC-012 AV-011(0) Brake disc material change on DSC-006 TECHNICAL SUPPORT FOR AMERICAN AND CANADIAN CUSTOMERSsupport@beringer-aero.us +1 864 214 4274TECHNICAL SUPPORT EUROPE support@beringer-aero.com +33 6 07 97 25 19
