Choose your language :

Beringer Aero

WHEELS - BRAKES - Landing Gear
High performance for Aircraft
Products

Brake Master cylinders

  • Lever Brake Master Cylinders Heel operated - SuperCub Type

    Lever Brake Master Cylinders Heel operated - SuperCub Type NEW View details
    Lever Brake Master Cylinders Heel operated - SuperCub Type
    Lever Brake Master Cylinders Heel operated - SuperCub Type

    For original Piper SuperCub and also BERINGER dual braking calipers.

    AV-CUB-122 (left) AV-CUB-123 (right)

     

    For BERINGER single caliper:

    AV-CUB-120 (left) AV-CUB-121 (right)

     

    Two ball bearings for smooth actuation and good feeling; 

    Get catalog Order form
  • MP-001 series - Bore 9/16"

    MP-001 series - Bore 9/16 View details
    MP-001 series - Bore 9/16"
    MP-001 series - Bore 9/16

    MP-001N Master brake cylinder

    available for MIL fluid (and for DOT4 on special demand)
    piston bore: 9/16 inch
    standard pressure: 870 PSI
    max pressure: 870 PSI
    weight: 159g (5.6 oz)
    (report to the master cylinder main page for the end fittings)



    Get catalog Order form
  • MP-002 series - Bore 1/2"

    MP-002 series - Bore 1/2 View details
    MP-002 series - Bore 1/2"
    MP-002 series - Bore 1/2

    MP-002E for DOT4 

    MP-002N for MIL mineral fluid
    piston boren: 1/2 inch
    standard pressure: 870 PSI
    max pressure : 1450 PSI
    weight: 94g
    (report to main page for end fittings)

    Get catalog Order form
  • MP-003 series - BORE 1/2"

    MP-003 series - BORE 1/2 View details
    MP-003 series - BORE 1/2"
    MP-003 series - BORE 1/2

    MP-003E for DOT4 

    MP-003N for MIL mineral fluid
    piston boren: 1/2 inch
    standard pressure: 870 PSI
    max pressure : 1450 PSI
    weight: 113g
    (report to main page for end fittings)

    Get catalog Order form
  • LEVERS

    LEVERS View details
    LEVERS
    LEVERS

    LEVER controls for brake master cylinders

    Get catalog Order form
These master cylinders have been designed for a very long life and assure very long trouble free service. We have tested them over 100,000 cycles with success. 
The piston is protected from dust by a lipseal. 
  • available for DOT4 fluid OR for MINERAL (MIL FLUID) (seals are different, never mix and report to the brake fluid recommendation)
  • high quality aluminum alloy machined from solid on CNC
  • 100% protected from corrosion: anodized coating and stainless steel components
  • Light weight: more than 30% of weight saving compare to standard master cylinder
  • Ultralow friction for improved efficiency
CAUTION 

The seals inside the MASTER BRAKE CYLINDERS are specific for each type of brake fluid. (For complete information please report to the page BRAKE FLUIDS).

It is not possible to put DOT4 brake fluid in a master cylinder with seals for MINERAL (MIL) fluid and it is not possible to put MINERAL brake fluid in a master cylinder with seals for DOT4 brake fluid. 
  • The letter E means for DOT4 brake fluid
  • The letter N means for MINERAL (MIL) brake fluid


Part numbers and dimensions of the brake master cylinders including the fittings





*    For MP-002 and MP-003 the ends must be ordered separately

**  Master cylinder is not included in the kit. Please order one MP-002 (E or N) and one CHP-003

*** Master cylinders are not included in the kit. Please order two MP-002 (E or N) and two CHP-003

 1 bar <>14.5 psi - 1 psi <> 0.069 bar

Hydraulic fittings for master brake cylinders

Here are only few exemples of hydraulic fittings and adaptors. Many other combinations are available; report to the catalog pages 36-37-38. Tha banjo bolt is delivered with the master cylinder.